top of page
Dashr | Blue
Operating the T-Test
The T-Test is a simple running test of agility, involving forward, lateral, and backward movements, appropriate to a wide range of sports. This drill uses a stationary or moving start and requires 1 timing gate.
Step-by-step instructions:
- Install batteries in each laser you plan to use.
- Install/open the Dashr app on your phone or tablet. (Create an account here if you have not already)
- Register each laser in the app - Navigate to the "Device Registration" button at the bottom, power on the lasers one at a time and select them from the "Available" list and assign them a number. Write that number on your laser. (This only has to be done the first time you use the laser with this phone/tablet)
- Return to the home menu and select T-Test.
- Screw the laser onto a taller tripods, positioned so that the beam is around hip height.
- Screw a reflector onto a matching tripod and position laser and reflectors across from each other to create a line to pass through.
- Select if you would like a static (stationary) or moving start.
- With the lasers on, select the appropriate laser from the drop-down menu and press the "Connect" button. If it does not work the first time, repeat.
- Once all devices are connected, press the "Start Testing" button.
- Check in the appropriate athlete (details here) - optional.
Stationary Starts
- With QuickRun on, get set while in the gate, after 3 sec of blocking the laser you will get a "Go!" message. Leave the laser when you want (time will turn blue - indicating that timing is taking place), and you get a result when you cross the gate again.
- With QuickRun off (option in settings) you will see “Set” and “Reset” buttons to give you control of when a test starts. Press "Set" once the athlete is ready to take off - then you will get the "Go!" message. Press "Reset" to clear the time for the next athlete.
Moving Starts
- With QuickRun on, move through the starting gate to begin timing (time will turn blue - indicating that timing is taking place), and you get a result when you cross the gate again.
- With QuickRun off (option in settings) you will see “Set” and “Reset” buttons to give you control of when a test starts. Press "Set" once the athlete is ready to take off. Press "Reset" to clear the time for the next athlete.
Visit our forum for additional details, FAQs, and specifics on drills - all on a searchable platform where you can also ask questions and share experiences.
bottom of page